CPUG: The Check Point User Group

Resources for the Check Point Community, by the Check Point Community.


Tim Hall has done it yet again - That's right, the 3rd edition is here!
You can read his announcement post here.
It's a massive upgrade focusing on current versions, and well worth checking out. -E

 

Results 1 to 6 of 6

Thread: jumbo hot fix acc. on r80.10 on the gateway not showing after installation.

  1. #1
    Join Date
    2017-09-21
    Posts
    42
    Rep Power
    0

    Default jumbo hot fix acc. on r80.10 on the gateway not showing after installation.

    I did not see the installed jumbo hotfix on the firewall, while installing jumbox take 103 it didnt give any errors.

    Not sure why its not showing.



    > cpinfo -y all

    [IDA]
    HOTFIX_R80_10

    [CPFC]
    HOTFIX_R80_10

    [FW1]
    HOTFIX_R80_10

    FW1 build number:
    kernel: R80.10 - Build 438

    [SecurePlatform]
    No hotfixes..

    [CPinfo]
    No hotfixes..

    [PPACK]
    HOTFIX_R80_10

    [DIAG]
    HOTFIX_R80_10

    [CVPN]
    HOTFIX_R80_10

    [CPUpdates]
    BUNDLE_R80_10_JUMBO_HF Take: 103

  2. #2
    Join Date
    2011-08-02
    Location
    http://spikefishsolutions.com
    Posts
    1,657
    Rep Power
    10

    Default Re: jumbo hot fix acc. on r80.10 on the gateway not showing after installation.

    doesn't it show on that last line you pasted?

    also i think there is a command called

    installed_jumbo_take

    or something like that... that will show the take as well.

  3. #3
    Join Date
    2017-09-21
    Posts
    42
    Rep Power
    0

    Default Re: jumbo hot fix acc. on r80.10 on the gateway not showing after installation.

    You are right, the last line shows but I would have thought it would be showing under FW1 showing the Jumbo take, has it been changed on r80.10?

    [FW1]
    HOTFIX_R80_10

    FW1 build number:
    kernel: R80.10 - Build 438

  4. #4
    Join Date
    2008-07-31
    Location
    Netherlands, Europe
    Posts
    1,146
    Rep Power
    13

    Default Re: jumbo hot fix acc. on r80.10 on the gateway not showing after installation.

    This is what I get with Jumbo 112:


    This is Check Point CPinfo Build 914000182 for GAIA
    [KAV]
    HOTFIX_R80_10

    [IDA]
    HOTFIX_R80_10

    [CPFC]
    HOTFIX_R80_10
    HOTFIX_R80_10_JUMBO_HF Take: 112


    [FW1]
    HOTFIX_R80_10
    HOTFIX_R80_10_JUMBO_HF Take: 112


    FW1 build number:
    This is Check Point's software version R80.10 - Build 077
    kernel: R80.10 - Build 070


    [SecurePlatform]
    HOTFIX_R80_10_JUMBO_HF Take: 112


    [PPACK]
    HOTFIX_R80_10
    HOTFIX_R80_10_JUMBO_HF Take: 112


    [CPinfo]
    No hotfixes..


    [DIAG]
    HOTFIX_R80_10

    [CVPN]
    HOTFIX_R80_10
    HOTFIX_R80_10_JUMBO_HF Take: 112


    [CPUpdates]
    BUNDLE_R80_10_JUMBO_HF Take: 112


    [rtm]
    No hotfixes..

    I could not find one with 103 on it so quickly as we also did not install that version very much as there were a lot of issues with it. I also see that you have a later take of the build, this has a part of the jumbo built in.
    installed_jumbo_fix does not exist under R80.10 anymore (or not yet).
    Regards, Maarten.
    Triple MDS on R77.30, MDS on R80.10, VSX, GAIA.

  5. #5
    Join Date
    2017-09-21
    Posts
    42
    Rep Power
    0

    Default Re: jumbo hot fix acc. on r80.10 on the gateway not showing after installation.

    Thanks for your reply

    When we see something like - "kernel: R80.10 - Build 438 or R80.10 - Build 435" how do we know what hotfix/jumbo fix/take it already has?

  6. #6
    Join Date
    2012-08-16
    Posts
    182
    Rep Power
    8

    Default Re: jumbo hot fix acc. on r80.10 on the gateway not showing after installation.


Similar Threads

  1. Blink - Full gateway installation in 5 minutes
    By PhoneBoy in forum Check Point Release Notifications
    Replies: 10
    Last Post: 2019-02-01, 14:25
  2. R77.30 Jumbo HFA 216 not seen in installer
    By slowfood27 in forum R77.30
    Replies: 16
    Last Post: 2017-04-20, 19:59
  3. R77.30 jumbo hotfix
    By cciesec2006 in forum Miscellaneous
    Replies: 7
    Last Post: 2016-06-06, 18:14
  4. Replies: 1
    Last Post: 2013-10-08, 15:34
  5. Gateway showing as disconnected in SmartView Monitor
    By jimbul in forum Check Point SecurePlatform (SPLAT)
    Replies: 9
    Last Post: 2009-01-29, 08:13

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •