CPUG: The Check Point User Group

Resources for the Check Point Community, by the Check Point Community.


Tim Hall has done it again! He has just released the 2nd edition of "Max Power".
Rather than get into details here, I urge you to check out this announcement post.
It's a massive upgrade, and well worth checking out. -E

 

Results 1 to 5 of 5

Thread: How to verify CPAP-SG5600-NGTX-SSD install SSD ?

  1. #1
    Join Date
    2011-07-13
    Posts
    6
    Rep Power
    0

    Default How to verify CPAP-SG5600-NGTX-SSD install SSD ?

    Hi,

    customer want a NGFW with SSD installed so we sold a CPAP-SG5600-NGTX-SSDs to customer.
    Customer want us to prove it that there is SSD inside the SG5600.

    Is there any information I can show from SG5600 about SSD ?

    Many Thanks!
    Todd

  2. #2
    Join Date
    2012-07-10
    Location
    Zurich, Switzerland
    Posts
    257
    Rep Power
    7

    Default Re: How to verify CPAP-SG5600-NGTX-SSD install SSD ?

    from the Console in expert mode do a "dmesg grep | Vendor"

  3. #3
    Join Date
    2007-03-30
    Location
    DFW, TX
    Posts
    257
    Rep Power
    12

    Default Re: How to verify CPAP-SG5600-NGTX-SSD install SSD ?

    Code:
    [Expert@ MyFW-5600-01:0]# fdisk -l
    
    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1          38      305203+  83  Linux
    /dev/sda2              39        2383    18836212+  82  Linux swap / Solaris
    /dev/sda3            2384       60801   469242585   8e  Linux LVM
    [Expert@MyFW-5600-01:0]# smartctl -i /dev/sda
    smartctl 5.40 2010-10-16 r3189 [i686-redhat-linux-gnu] (local build)
    Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
    
    === START OF INFORMATION SECTION ===
    Device Model:     WDC WD5003ABYZ-011FA0
    Serial Number:    [redacted]
    Firmware Version: [redacted]
    User Capacity:    500,107,862,016 bytes
    Device is:        Not in smartctl database [for details use: -P showall]
    ATA Version is:   8
    ATA Standard is:  Exact ATA specification draft version not indicated
    Local Time is:    Tue May 29 15:58:23 2018 GMT
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    You can look up the device model to confirm what it is. Strictly, this could be faked (it's just sending a control message over the SATA link asking for a string from the disk controller), but that is exceedingly uncommon. The only way to be more certain is to open the server and physically look.

    Edited to add: Forgot to mention. I have confirmed this works on R77.30 and R80.10. It should be fine on everything which ever shipped on the 5600. smartctl does not appear to be present on SecurePlatform 2.6, so anybody running an older system will need to find another method of getting the model.
    Last edited by Bob_Zimmerman; 2018-05-29 at 12:08.
    Zimmie

  4. #4
    Join Date
    2011-07-13
    Posts
    6
    Rep Power
    0

    Default Re: How to verify CPAP-SG5600-NGTX-SSD install SSD ?

    Quote Originally Posted by slowfood27 View Post
    from the Console in expert mode do a "dmesg grep | Vendor"
    Thank you slowfood27! I can find SSD vendor from demsg. It is a SAMSUNG MZ7KM240HMHQ-00005 SSD.

    Todd

  5. #5
    Join Date
    2011-07-13
    Posts
    6
    Rep Power
    0

    Default Re: How to verify CPAP-SG5600-NGTX-SSD install SSD ?

    Quote Originally Posted by Bob_Zimmerman View Post
    Code:
    [Expert@ MyFW-5600-01:0]# fdisk -l
    
    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1          38      305203+  83  Linux
    /dev/sda2              39        2383    18836212+  82  Linux swap / Solaris
    /dev/sda3            2384       60801   469242585   8e  Linux LVM
    [Expert@MyFW-5600-01:0]# smartctl -i /dev/sda
    smartctl 5.40 2010-10-16 r3189 [i686-redhat-linux-gnu] (local build)
    Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
    
    === START OF INFORMATION SECTION ===
    Device Model:     WDC WD5003ABYZ-011FA0
    Serial Number:    [redacted]
    Firmware Version: [redacted]
    User Capacity:    500,107,862,016 bytes
    Device is:        Not in smartctl database [for details use: -P showall]
    ATA Version is:   8
    ATA Standard is:  Exact ATA specification draft version not indicated
    Local Time is:    Tue May 29 15:58:23 2018 GMT
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    You can look up the device model to confirm what it is. Strictly, this could be faked (it's just sending a control message over the SATA link asking for a string from the disk controller), but that is exceedingly uncommon. The only way to be more certain is to open the server and physically look.

    Edited to add: Forgot to mention. I have confirmed this works on R77.30 and R80.10. It should be fine on everything which ever shipped on the 5600. smartctl does not appear to be present on SecurePlatform 2.6, so anybody running an older system will need to find another method of getting the model.
    Thank you Zimmie.

    I can find SSD vendor name and detail from my SG5600. This SG5600 is installed with a 240GB SAMSUNG MZ7KM240HMHQ-00005.

    Todd

Similar Threads

  1. CPAP-SG4208
    By *tomo* in forum Check Point 2012 Appliances
    Replies: 5
    Last Post: 2016-02-05, 18:39
  2. verify NAT translation
    By Kzak45 in forum Firewall Blade
    Replies: 2
    Last Post: 2014-03-31, 12:03
  3. Error on policy verify but not on install
    By belvdr in forum Clustering (Security Gateway HA and ClusterXL)
    Replies: 24
    Last Post: 2012-03-27, 12:16
  4. CPAP-SM5007 cannot load operating system
    By Emperor in forum Check Point Smart-1 Security Management Appliances
    Replies: 2
    Last Post: 2011-08-16, 06:56
  5. How to Verify UTM License
    By avilT in forum Licensing
    Replies: 7
    Last Post: 2008-01-08, 04:59

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •