CPUG: The Check Point User Group

Resources for the Check Point Community, by the Check Point Community.


CPUG Challenge 2018?? We will be holding another CPUG Challenge for 2018.
The plan is to time it around CPX again (earlier this year), but not necessarily limit it to those in attendance.
I'll provide more details as we get a bit closer, but be ready! -E

 

Results 1 to 2 of 2

Thread: R77.20 on Appliance 1100

  1. #1
    Join Date
    2013-07-29
    Posts
    4
    Rep Power
    0

    Default R77.20 on Appliance 1100

    My management server is R77.30 it's a Smart 1-5.

    I have a remote Appliance 1100 that runs 75.20.
    I upgraded the 1100 to R77.20 today.

    The first thing I noticed was IPS was no longer running on the 1100, apparently due to:

    "The recommended IPS profile is usually not intended for small office appliances.
    We recommend that you create a different IPS profile for these appliances, see sk105217"

    which I have never seen before and it has been running with this configuration for a couple of years, but
    whatever.

    So I tried to but was unable to push policy. It reported a load_module disk space error.
    While investigating that issue, I lost IP connectivity to the device. Apparently it deinstalled and reverted
    to the 75.20 image.

    I have successfully expanded the volume on my Smart-1 to accommodate the R77.30 image but am not seeing
    a way to do this to the 1100.

  2. #2
    Join Date
    2013-07-29
    Posts
    4
    Rep Power
    0

    Default Re: R77.20 on Appliance 1100

    Nevermind. I was trying to ssh from an untrusted host.
    Needed to add it in Administrator Access.

Similar Threads

  1. Check Point 1100 Appliance - FAQ
    By danjun in forum Check Point Series 80/1100 Appliances
    Replies: 52
    Last Post: 2016-05-05, 02:06
  2. 1100 appliance startup scrpts
    By DavyDM in forum Check Point Series 80/1100 Appliances
    Replies: 2
    Last Post: 2014-10-15, 07:52
  3. No 1100 Appliance selection on an R77.20 SmartCenter?
    By RayPesek in forum Check Point Series 80/1100 Appliances
    Replies: 2
    Last Post: 2014-10-05, 18:03
  4. 1100 appliance firmware
    By torenhof in forum IPsec VPN Blade (Virtual Private Networks)
    Replies: 2
    Last Post: 2014-01-28, 10:21
  5. Routing between two CP Appliance 1100's
    By jessica6 in forum Firewall Blade
    Replies: 2
    Last Post: 2013-08-08, 16:35

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •