Installing on Solaris T2000 fail - R60 + R65

[gyovel]

I have servers of, sun platform T2000 with Solaris 10 OS.
I intend to install NGX R60 and R65 on them. (stand alone mode)
have all the packages and patches as written in the release notes.
the servers have no CD/DVD so they install from packages.
say that variabels were not initialized.
So I write them manually.
the network interfaces I have are: e1000g
I was successful install R65 on T2000, but only after manual copy
/opt/CPsuite-R65/fw1/state/default.bin file,
manual initialize Check Point variabels and write e1000g accept in /etc/fw.boot/ifdev file.

error when install R60:

Installing VPN-1 ^ FireWall-1 kernel module...
Apr 6 22:18:23 t2000 krtld: /kernel/drv/sparcv9/fw: undefined symbol
devfsadm: driver failed to attach: fw
Warning: Driver (fw) successfully added to system but failed to attach
Apr 6 22:18:23 t2000 krtld: ^dev_get_dev_info^
Apr 6 22:18:23 t2000 krtld: WARNING: mod_load: cannot load module ^fw^
Apr 6 22:18:25 t2000 krtld: /kernel/drv/sparcv9/fw: undefined symbol
Apr 6 22:18:25 t2000 krtld: ^dev_get_dev_info^
Apr 6 22:18:25 t2000 krtld: WARNING: mod_load: cannot load module ^fw^
Apr 6 22:18:25 t2000 vpn: VPN-1: driver installed

error when install R65:

Scanning for unknown interfaces...
IP forwarding disabled
Hardening OS Security: IP forwarding will be disabled during boot.
Generating default filter
Killed
cp: cannot access /opt/CPsuite-R65/fw1/state/default.bin
Cannot copy default filter to /etc/fw.boot

cpconfig: Configuration aborted

[mcnallym]

I have always had problems when installing not using the CD. I would suggest maybe an exeternal USB CD drive may be your best bet. That is how I install SPLAT on servers that I don't want to have CD's installed in for.

[dys152]

Hi there, I always use this, works a treat:

mount -F hsfs -o ro `lofiadm -a /var/tmp/checkpoint.iso` /mnt

Just make an ISO of the CD/DVD and copy it on then it uses loopback adm to mount the image as a device.