CP wont let me plumb vlan interfaces

[Adam Carter]

I've never used vlans with CP before, what am i doing wrong?

rowan.domain# uname -a
SunOS rowan.domain 5.9 Generic_117171-07 sun4u sparc SUNW,Sun-Fire-V240
rowan.domain# fw ver
This is Check Point VPN-1(TM) & FireWall-1(R) NG with Application Intelligence (R55) HFA_14, Hotfix 463 - Build 008


rowan.domain# ifconfig bge2 plumb
Oct 16 12:12:48 rowan.domain fw: FW-1: initialized on bge2 (4)
Oct 16 12:12:48 rowan.domain fw: FW-1: loading filter on bge2 (17a2f78)
rowan.domain# ifconfig bge2 unplumb
rowan.domain# ifconfig bge8030002 plumb
ifconfig: SIOCSLIFNAME for ip: bge8030002: no such interface
Oct 16 12:13:16 rowan.domain fw: FW-1 fwstrmodrput: ERROR_ACK for DL_ATTACH_REQ (0b) dlerr=8 unixerr=0 (17a3710)
Oct 16 12:13:16 rowan.domain fw: FW-1 fwstrmodrput: ERROR_ACK for DL_BIND_REQ (01) dlerr=3 unixerr=0 (17a3710)
Oct 16 12:13:16 rowan.domain fw: FW-1 fwstrmodrput: ERROR_ACK for DL_UNBIND_REQ (02) dlerr=3 unixerr=0 (17a3710)
Oct 16 12:13:16 rowan.domain fw: FW-1 fwstrmodrput: ERROR_ACK for DL_DETACH_REQ (0c) dlerr=3 unixerr=0 (17a3710)
rowan.domain#

[Adam Carter]

Ok, first error was that i had an extra zero in the interface name, when i corrected that the bge came up, but the ce interfaces are still reporting the same issue. There's been a lot of driver updates for the gigaswift cards (patch 112817 for solaris 9) so i'm going to try that.