Smartview monitor - 1 gateway disconnected

[joeri]

Hi,

we have 1 firewall which stays disconnected in smartview monitor, analysis:
- mgmt traffic allowed in policy
- policy push is OK
- SIC is OK
- logs are OK
- with netstat mgmt ports are listening
- when doing fw monitor we see firewall sending resets back to the mgmt, however not able to find the cause of those resets...

has anybody an idea what the problem could be ?

thanks !!!

[AB2AB2]

I rise this ancient question up. I have the same trouble. My Edges show wrong "Disconnected" status. First, one of my Edges goes wrong, and two days later - the second. And I can work with sites that protected by this "disconnected" Edges, so they are really connected.

Other modules (SPLAT) show themselves right.

Version of CheckPoint - last actual R65 HFA02 + known fix for Edges.

[dinesh_ymca]

Hi,
You are seeing the gateway as discinnect right from the beginining or was it happned after doing some configuration chnage. You can try cpstop and cpstart on that gateway which sometimes solved the problem.
Best Regards
Dinesh
The world of technology
(good technical articles)

[foyster]

I have seen a similar issue under SPLAT R65 v2.6 and Smart view Monitor. It seems that When a cluster is under a bit of load that SVMonitor says that the FW is discosnnected. When the load goes away all is OK.

I have opened a TAC case and I am awaitng a reply.