add an internal network

[me9ki]

hi to all
last week i've changed all the internal ip addressing in my lan. before was 192.168.1.0/24 and now is 10.21.0.0/16. For semplicity reasion i mantained both address, additing the new lan as object in all security and nat rule.
the servers has 2 ip address defined.
all is working fine, in/out traffic and vpn except the secureClient:
the traffic to the old lan is ok and nope for the new lan. in smartview tracker there is a drop record by cleanup-rule
here my routing table:
Static 0.0.0.0/0 via x.x.x.x, age 20268130, cost 0, eth1c0
Connected 10.21/16 is directly connected, eth2c0
Connected 10.22/16 is directly connected, eth3c0
Connected 10.42.164/29 is directly connected, eth1c0
Connected 127.0.0.1/32 is directly connected, loop0c0
Connected 192.168.1/24 is directly connected, eth2c0
Connected 195.31.240/28 is directly connected, eth1c0

the strange:
in secure client if i check "route all traffic trought gateway" all working fine with new lan but i can't change this propierty on all my nomad user

any idea??
thanks in advance

[abusharif]

have u added ur new internal network into Encryption domain of your VPN gateway? This is probably the issue. Make sure new network is included in ur ENC domain and do an topoligy update on the client

[me9ki]

Originally Posted by abusharif

have u added ur new internal network into Encryption domain of your VPN gateway? This is probably the issue. Make sure new network is included in ur ENC domain and do an topoligy update on the client

thanks a lot abusharif!
the nomad need only a topology update!
Regards