Installing R65 on an IP390 - space issues !

[tangerine0072000]

Hi we have an IP390 (flash based) with 1 Gb memory running a fresh install of IPSO 4.2.

Just downloaded and installed 'VPN-1 PowerUTM NGX R65 Package for Flash Based Platforms with 1GB of RAM or Disk Based Platforms on IPSO 4.1 and 4.2'


The installation fails with... error: Insufficient space on /opt to untar /var/tmp2/pkg/IPSO_wrapper_R65/CPfw1/fw1_R65_IPSO.tgz.

I used the 'NEWPKG' command to install the image.

Any ideas ?

[phollan1]

Is there a current package already installed that needs removing first, are you also 100% sure that you have the flash version as there were lots of options when I looked for our disk based IP390.
Also is there an old legacy version of IPSO sitting on the device as well that can be removed. Also with an IP265 with flash I had problems installing via Voyager and had to do it via CLI.

[simion]

Download the 512mb flash package and use that. With ipso 4.2 and R65 that will work on a 1gig flash ip390. It won't leave you any space to go to R65 HFA02 though.