IP Address Issue

[Ghost_Dog]

Good Monring Folks,
Here is the new story.
I have installed SPlat, configured it's IP Addresses on Eth0 and Eth1 and then performed the upgrade_import command.
This all goes smoothly and once it has completed, I can log into the box via webui, ssh or gui client.
THis only lasts for a matter on mins and I am then locked out of all entry points except for the local console.
I have discovered that this is becase the firewall portion on the box has taken on the IP Address of the box that I did the export from, however, SPlat is still using the IP Addresses that I set origionally....
How do I get into the firewall software from the console (I assume something in expert mode) to change the IP Addresses so I can get onto the box?
Sorry if the explanation is a little convoluted.

IJ

[chillyjim]

[i]fw unloadlocal[\I] then you should be able to connect with the SmartDashboard and fix the topology in the firewall object

[Ghost_Dog]

Hey Chilli,
I have tried that command before I wote. It enables me to get in using ssh (Which I couldn't before I set the command) but I get an error when trying to connect using smart dashboard - No Valid licence Found on smart centre server....
Any ideas?

[Ghost_Dog]

Just so as you know. This testfw was only built yesterday so the 15 day licence should be in effect.

[stuartgreen]

if you've run an upgrade_import the 15 day license won't come into affect. it will be cancelled out by the licenses present in the export package. the only command line way i can think of to edit the ip address is to do a dbedit, which is neither pretty or friendly!

can't you change the IP address of the os to match that of the old firewall so you can get in and change it to the new one you want? might need to explain what you've done / are doing a bit clearer.

stu