Another ClusterXL trouble

[cciesec2006]

As you can see gw1 shows the correct load but gw2
is completely out of whack. It shows gw1 is running
at 100% load while gw2 is running at 0% load. What
the hell. I am at a lost for explaination.

both firewalls are running NG AI R55 with hfa_20.



[Expert@GW1]# cphaprob state

Cluster Mode: Load Sharing (Unicast)

Number Unique Address Assigned Load State

1 (local) 10.1.1.1 30% active (pivot)
2 10.1.1.2 70% active

[Expert@GW1]#
[Expert@GW2]# cphaprob state

Cluster Mode: Load Sharing (Unicast)

Number Unique Address Assigned Load State

1 10.1.1.1 100% active (pivot)
2 (local) 10.1.1.2 0% active

[Expert@GW2]#



[Expert@GW1]# cphaprob -a if

Required interfaces: 3
Required secured interfaces: 1

eth0 UP non sync(non secured), broadcast
eth1 UP non sync(non secured), broadcast
eth2 UP sync(secured), broadcast
eth3 Disconnected non sync(non secured), broadcast

Virtual cluster interfaces: 3

eth0 10.250.97.1
eth1 192.168.0.22
eth2 10.1.1.1

[Expert@GW1]#
[Expert@GW2]# cphaprob -a if

Required interfaces: 3
Required secured interfaces: 1

eth0 UP non sync(non secured), broadcast
eth1 UP non sync(non secured), broadcast
eth2 UP sync(secured), broadcast
eth3 Disconnected non sync(non secured), broadcast

Virtual cluster interfaces: 3

eth0 10.250.97.1
eth1 192.168.0.22
eth2 10.1.1.1

[Expert@GW2]#