VRRP CLUSTER CPSTART-OUTPUT

[avilT]

I have pasted the outpur of cpstart command on a VRRP cluster member.
Can someone interpret the lines marked in red.
Also I see the cluster member is trying to fetch the policy from peer member as well as smart center server.
The IP 10.0.0.1 is the peer IP on the Sync interface and the IP 172.16.0.10 is the smart center server
__________________________________________________ _______________
FW01[admin]# cpstart

cpstart: Start product - SVN Foundation

SVN Foundation: Starting cpWatchDog
SVN Foundation: Starting cpd
SVN Foundation started

cpstart: Start product - FireWall-1

CPHA : Getting into preconfigured mode...
FW-1: fwkdebug_register: module cluster already registered
FW-1: fwha_kdebug_register: fwkdebug_register failed
Jun 21 04:03:00 FW01 [LOG_CRIT] kernel: CPHA : Getting into preconfigured mode..
.
Jun 21 04:03:00 FW01 [LOG_CRIT] kernel: FW-1: fwkdebug_register: module cluster
already registered
Jun 21 04:03:00 FW01 [LOG_CRIT] kernel: FW-1: fwha_kdebug_register: fwkdebug_reg
ister failed
FW-1: 3 interfaces installed

Generating tmp/cphamacs file ...
Generating tmp/cphaips file ...
Restoring previous problem notification devices statuses.
FireWall-1: Starting fwd


Installing Security Policy Standard on all.all@FW01
Fetching Security Policy from localhost succeeded

Fetching Security Policy From: 10.0.0.1 172.16.0.10

Local Policy is Up-To-Date.
The Policy was not installed because it is the same as the Policy already on the Module.

--------------------------------------------------------------------------