Problems with Cluster XL after adding new interface

[erobinson]

I had cluster XL working just fine and added a new interface. Added interface, pretty sure i made all the appropriate adjustments to the cluster members and cluster object, i've rebooted but still no luck. Keeps reporting "active interface check on member 2 detected a problem (6 interfaces required, only 5 up), but cphaprob state reports all interfaces up.

ng ai hotfix .321 build 7 on solaris 2.8....

any ideas? thanks!

[Aussie]

Can you provide the output of "cphaprob -a if"?

[erobinson]

From member 1...


# cphaprob -a if

Required interfaces: 6
Required secured interfaces: 1

hme1 UP non sync(non secured), multicast
qfe0 UP non sync(non secured), multicast
qfe3 UP non sync(non secured), multicast
qfe4 UP non sync(non secured), multicast
qfe5 UP sync(secured), multicast
qfe7 UP non sync(non secured), multicast

Virtual cluster interfaces: 5

hme1 <external ip address>
qfe0 192.168.255.76
qfe3 192.168.255.81
qfe4 172.16.255.33
qfe7 172.16.0.1


From member 2...


# cphaprob -a if

Required interfaces: 6
Required secured interfaces: 1

hme1 UP non sync(non secured), multicast
qfe0 UP non sync(non secured), multicast
qfe3 UP non sync(non secured), multicast
qfe4 UP non sync(non secured), multicast
qfe5 UP sync(secured), multicast
qfe7 UP non sync(non secured), multicast

Virtual cluster interfaces: 5

hme1 <external ip address>
qfe0 192.168.255.76
qfe3 192.168.255.81
qfe4 172.16.255.33
qfe7 172.16.0.1



and it's only qfe3 that's generating complaints...

[seanmac1904]

have you checked that igmp snooping is disabled on the switch that qfe3 is plugged into ?

cheers

Sean