Moving Edges to a new Provider-1 System

[Felix]

Hi,

we started migrating a SmartCenter Server to a Provider-1 Environment.
With the firewalls everything works fine.
Now I am not sure, how to migrate the VPN-1 Edges to the Provider-1 System.
The IP-addresses of the SmartCenter Server and the Provider-1 system differs.
I am thinking about using configuration scripts like this:

set smp server x.x.x.x gatewayid EDGE_GW registrationkey {S}OTr4Zthn=
connect enabled softwareupdates automatic

Does anybody has some experience with migrating edges to a Provider-1 system? We don't have a SMP.
Any help would be appreciated.
Thanks in advance.

Felix

[msjouw]

Felix,

I did that a while back, depending on the number of Edges you need to do it either by hand in the Web GUI, as the command stated does not connect really, the first command just enters the data but does not really connect. I have never used the second one and I'm not sure if that does do the initial connection.

[Felix]

Hi msjouw,

sorry this was a CRLF mistake.

the command is:

set smp server x.x.x.x gatewayid EDGE_GW registrationkey {S}OTr4Zthn= connect enabled softwareupdates automatic

Felix

[msjouw]

Felix,

When you try:
set smp connect disabled
set smp server x.x.x.x gatewayid EDGE_GW registrationkey {S}OTr4Zthn= softwareupdates automatic
set smp connect enabled

You should be able to test this on one test box and see if it connects to your new CMA

[Felix]

hey,

thanks alot. It's working!
have a nice weekend.

Felix