SNMP Port references

[andypilk]

When polling an Edge or Safe@ device using SNMP we get ports et0, eth1 and eth2.

Anybod know which is the LAN/WAN/DMZ ??

[RobertGraham]

Couldn't you just query the IP for the interface and compare that with your config? Check Point only supports SNMP v1, and I'm not versed on those MIBs. But, it shouldn't be to difficult to pair the interface with the IP.

Once you have that, log into the mgt console and see which IP is configured on the WAN and the DMZ, for example.