UTM-1 270

[karu1971]

I have setup the new UTM-1 270 box via webgui configuring external, internal interface, and routing....

Intersting things is I have not add any rules (aprtfrom Admin Rules to access to the box)

I can see traffic pass through between internal and external ....

by default it should be any traffic pass throught FW , untill we implement the ruls to allow??

whech I check the smart view logs... I saw logs using rule 0 ( impled rules)

some can advice what coulde be this issue///

[melipla]

There are a lot of "implied" rules which allow traffic to pass through the gateway--they mainly have to do with communication to the Smartcenter Server (client or gateway). In your SmartDashboard, go to View -> Implied Rules. At the top of your rulebase you'll see them. Different configuration settings (mainly under Policy -> Global Properties -> Firewall -> "Firewall Implied Rules") can influence the number of rules present.

HTH

[varera]

Originally Posted by karu1971

I have setup the new UTM-1 270 box via webgui configuring external, internal interface, and routing....

Intersting things is I have not add any rules (aprtfrom Admin Rules to access to the box)

I can see traffic pass through between internal and external ....

by default it should be any traffic pass throught FW , untill we implement the ruls to allow??

whech I check the smart view logs... I saw logs using rule 0 ( impled rules)

some can advice what coulde be this issue///

Initial policy allows certain traffic to pass the GW, for mantainance and management purposes.