NGX R65 SPLAT problem with raid 1.0

[darkprince21]

Hi,

I coulndt install secureplatform R65 2.6 with HP ProLiant DL380 G5 server.This server have a 4 harddisk and this harddisk working raid 1.0 .Two harddisk capacity 76 gb another two harddsik 36 gb.

When installing secure platform R65 2.6 after harddisk format step, server machine reboot itself , system could not open and get error messages.This Error mesage says : "Mounting Local filesystems:FAILED " and " configuring network : FAILED".Two or three minute later I can acces first admin page screen.Then I get this message "/opt/CPshared/5.0/tmp/.Cpprofile.sh"."Cannot open configuraqtion file env.". When try the expert mode this time system get errors "/bin/cpconfig.start ve /bin/sysconfig" and "/opt/CPshared/5.0/tmp/.Cpprofile.sh"

After all this problem ı disable raid .With only one harddisk I can install SPLAT 2.6 succesfully.

please help me it is very important.


my machine :HP ProLiant DL380 G5 Server.
HP ProLiant DL380 G5 Server series overview - HP Small & Medium Business products

NIC :HP NC364T
HP.com - networking - HP NC364T PCI Express Dual Port Gigabit server adapter - Overview & Features

[melipla]

So you have two raid disks....what happens if you remove the second one and only install on one raid-1?

Which raid controller did you have installed?

[ngsud]

I also faced similar problem , you need to use HP boot CD for making Raid 1+0 and then install the SPLAT . I have 6 Server all DL380 G5 and working well with SPLAT 2.6 and SPLAT 2.4 Kernel for NGX R65 . With NGX R60 you need to have HFA03 BUILD CD as that contain all the drivers for Raid Card .