Can't open Web UI HELP!

[gatsbie]

Just got SPLAT installed but can't open Web UI.

anyone can access sk22548 on secure knowledge? Error: "page cannot be displayed" when accessing Web Interface of SecurePlatform


Thanks

[Lackie]

It basically says to make sure you are using https and not just http.

I would make sure that if it's also a firewall, make sure there isn't a policy that is blocking you.

[intehnet]

fwm unloadlocal to unload the policy and then give it a crack

[gatsbie]

I am using the SPLAT NGX60A.
on the CheckPoint_R60A_SecurePlatform_SecurePlatformPro_U ser_Guide.pdf

First Time Setup Using the Web Interface
After the installation from the CD has been completed, and the computer has been
rebooted, a first time setup is required in order to:
• configure the network settings
• configure the time/date/time zone
• configure the allowed IPs of SSH and administration Web UI clients
• select which products will be installed
• set the initial configuration of installed products

but I can't find where to configure the allowed IPs of SSH and administration Web UI clients.

[kva.kva]

Try to execute
webui disable
webui enable

Was SmartPortal installed?

[adamp]

I'm also looking for some solution to make the WEB UI working.

I've found out that the package spwm_dev_mgmt is not installed. If you call the command it always checks it:
rpm -q spwm_dev_mgmt
and following error message is displayed:
"This command is not active"

Any idea how to bring this package to the SPLAT?

Cheers,
Adam

[adamp]

Could it be that the Web UI works only on the SPLAT Pro?

[kva.kva]

Not only on SPLAt Pro. SPLAT have Web UI also (for some simple "parameters"). I think these UI are identical.
If you want SmartPortal you need license or SmartCenter Pro or separate SmartPortal license.

[RobertGraham]

One problem I had was, I had made config changes at the CLI. Then, I tested the web console with the user still logged in. It tried to kick out the one on the console, but it didn't work very well.

As long as I made sure to log out first, it worked a lot better. It shoudl be noted, this is the build on vmware supplied by CHKP.