Doubts: SNMP Configurations on SPLAT (VSX Gateway)

[tony123]

I cant get any snmptrap from my VSX Gateway. Below is my configuration.

Am i missing anything else ?


snmpd.conf


# Community String
rocommunity vvvv 10.65.200.14
rocommunity vvvv 10.65.200.17

# Community String

rocommunity vvvv 10.65.200.16
rocommunity vvvv 10.65.200.15

# Community String

rocommunity vvvv 10.65.200.12
rocommunity vvvv 10.65.200.18

trapcommunity vvvv

trapsink 10.65.200.14
trapsink 10.65.200.17
trapsink 10.65.200.16
trapsink 10.65.200.15
trapsink 10.65.200.12
trapsink 10.65.200.18

trap2sink 10.65.200.14
trap2sink 10.65.200.17
trap2sink 10.65.200.16
trap2sink 10.65.200.15
trap2sink 10.65.200.12
trap2sink 10.65.200.18

informsink 10.65.200.14
informsink 10.65.200.17


[Expert@gvenyf0001:0]# cat snmpd.users.conf
################################################## ###########################
#
# This file contains snmp daemon's users definitions
# This file updated automatically by snmp configuration script
# So be very careful when making changes to this file
#
################################################## ###########################

rocommunity vvvv



[Expert@gvenyf0001:0]# cd init.d
[Expert@gvenyf0001:0]# ./snmpd restart
Stopping snmpd: [ OK ]
Starting snmpd: [ OK ]

[tony123]

Could someone please reply. I have created rules in the Smart dash board, allowing traffic SNMP TRAP., But i dont see any traps, hitting the firewalls, in between.

[mwoodruff]

Any ideas on this? I am having the same issue but with a SPLAT SCS.