IP alias problem

[Hitman]

Hi,

I have a cluster HA of two members R60 HFA04 on two sunfire X2100

I configure 17 ips alias on eth1 for static natting. After that the /var/log/messages file get flood with these kernel messages:

Kernel: FW-1: fwha_notify_interface: there are more than 4 ips on interface eth1 notifying only ones

In two hours i get more than 15000 entry in the /var/log/messages file on each cluster member.

Except the flooding of /var/log/messages, everything seems to work well, no alarm on the cluster, SmartView monitor report nothing anormal for the two clusters member.

Thanks in advance for your help.

[chillyjim]

Why are you doing this? If you want the module to NAT you should NOT configure those IP addresses and just configure NAT in the object you are NATting.

[Hitman]

Yes, it's working

Thanks Chillyjim.

But it's become rapidly messy in the Address Translation section.

Specially if you have to do static NAT for both the source and the destination because of RPC connection and a private LAN that is not route.

Need 4 rules in automatic instead of 2 in manual

But this solve the filling of my syslog file with the kernel notification message.