Clientless VPN

[budgie69]

Hi Guys

Hope you can help?


I have setup Clientless VPN

Firewall object is acting as webserver.
Clientless VPN option selected in firewall properties
Rule put in place (user[source] - firewall[destination] - https[service] - userAuth[Action]
Certificate installed on client machine
connect to gateway https://x.x.x.x.

get the following error message;
FW-1 GATEWAY at failed to connect to the www server

No drops in logs


Thanks in advance.

[maverick]

First make sure your rule for Clientless VPN access is above your Stealth rule

Secondly, if your enforcement module is a Nokia IP appliance, you might need to change the SSL port that voyager uses to a non-standard port, so that HTTPS on TCP 443 is serviced by the SSL VPN daemon

Also check to see if their are any drops in the log on rule 0

If all else fails run a tcpdump to analyze the inbound traffic