View Single Post
  #7 (permalink)  
Old 2006-10-24
tolu60 tolu60 is offline
Junior Member
 
Join Date: 2006-10-24
Posts: 4
Rep Power: 0
tolu60 has an average reputation (10+)
Default Re: ClsuterXL not working when failed over

I had a similar problem initially, but turned out that I had the wrong cabled connected to to the wrong interface... also you may want to check the routing table on the cluster members if the cluster addresses are on different subnets to the member interface.
The problem I'm having now (if anyone else has experienced it) is that I'm not able to establish VPN tunnel using SecureClient.
My configuration is this: 6 interfaces on both cluster members, 2 DMZ, 1 synch, 2 external (internet for redundancy), and 1 for internal lan... all cluster member interfaces are on different subnest to the cluster (virtual) addresses with the exception of the internal interface. Internal is on 192.168.50.x which is also same subnet as the cluster IP for that interface...
The strangest thing is I can establish VPN tunnel when I'm on the 192.168.50.x subnet, but not from the internet. I'm guessing this is to do with the internet cluster IP and the member interfaces being on different subnets, but can't quite figure it out. Hope this makes sense?
Reply With Quote