Re: Strange output from cphaprob state ! This is the output from primary and secondary firewalls..... PRIMARY FIREWALL OUTPUT cphaprob -a if eth-s1/s2p1c0 sync(secured), multicast eth-s2/s2p1c0 sync(secured), multicast eth-s1/s2p2c0 non sync(non secured) Virtual cluster interfaces: 2 eth-s1/s2p1c0 172.16.10.10 eth-s1/s2p2c0 10.16.10.10 cphaprob -i list Built-in Devices: Device Name: IPSO member status Current state: OK Registered Devices: Device Name: Synchronization Registration number: 0 Timeout: none Current state: OK Time since last report: 3819.3 sec Device Name: Filter Registration number: 1 Timeout: none Current state: OK Time since last report: 3811.5 sec Device Name: cphad Registration number: 2 Timeout: 5 sec Current state: OK Time since last report: 0.2 sec Device Name: fwd Registration number: 3 Timeout: 5 sec Current state: OK Time since last report: 0.3 sec SECONDARY FIREWALL OUTPUT cphaprob -a if eth-s1/s2p1c0 sync(secured), multicast eth-s2/s2p1c0 sync(secured), multicast eth-s1/s2p2c0 non sync(non secured) Virtual cluster interfaces: 2 eth-s1/s2p1c0 172.16.10.10 eth-s1/s2p2c0 10.16.10.10 NGMIOF2[admin]# cphaprob -i list Built-in Devices: Device Name: IPSO member status Current state: OK Registered Devices: Device Name: Synchronization Registration number: 0 Timeout: none Current state: OK Time since last report: 4324.1 sec Device Name: Filter Registration number: 1 Timeout: none Current state: OK Time since last report: 4316.1 sec Device Name: cphad Registration number: 2 Timeout: 5 sec Current state: OK Time since last report: 0.3 sec Device Name: fwd Registration number: 3 Timeout: 5 sec Current state: OK Time since last report: 1.1 sec |