[EAP56]

Hi,

From the SecureRemote thread I found a thread that pointed out which ports are required by SecureRemote/SecureClient (See below). My question is do we need to open these ports using the Integrity Server or is there another means to configuring SecureClient with the Integrity Firewall?

Open the following ports and allow the following protocols:
protocol 50 for ESP
UDP 2746 for UDP Encapsulation
UDP 500 for IKE
TCP 500 for IKE over TCP
TCP 18231 for Policy Server logon when the client is inside the network
UDP 18233 for Keepalive protocol when the client is inside the network
TCP 18232 for Distribution Serer when the client is inside the network
TCP 264 for topology download
UDP 259 for MEP configuration
UDP 18234 for performing tunnel test when the client is inside the network
TCP 18264 for ICA certificate registration

Thanks.