 Re: Secure Client and ipassignment.conf
I remembered what we did:
1. On the Gateway object, under VPN, VPN Advanced, we enabled Dynamic Interface Resolution for SecuRemote/SecureClient upon tunnel initialization. Prior to that Office mode would not work at all.
2. After that the gateway didn't seem to recognise the name of the firewall in the Module column of the ipassignment.conf, so now we just use *
We also found that you need to do a cpstop/cpstart to get it to pick up the changes to the ipassignment.conf. At least that's the case on the Nokia with R55/AI.
JR |