 Re: R55 to R60 Advice
I don't have experience with the Edge platforms, so there's not much help I can offer.
What I would say though, is that if I'd done an upgrade, I would be checking my logging pretty much straight away, and I would be loathe to push policy if logging wasn't working. Try a DB install, rather than a policy push, see if logging starts. Also try and look at historical logs from the modules during the time you were upgraded - see if they offer any clues as to why it didn't work last time you tried.
Upgrading in place is a bit of a pain, due to these sorts of problems - you don't get a lot of time to fix it, if it's not working!
Check out your libsw versions, make sure they are up to date. |