Thread: Getting PXEBoot (ADS) to work through the firewall
View Single Post
  #3 (permalink)  
Old 2006-06-26
dguinn dguinn is offline
Junior Member
  
Join Date: 2006-04-19
Posts: 13
Rep Power: 0
dguinn has an average reputation (10+)
Default Re: Getting PXEBoot (ADS) to work through the firewall
AFAIK PXE will use DHCP/BOOTP to pull an address, but then uses either FTP or TFTP to pull the initial bootstrap to the system. Check your log files and see if you are having anything dropped immediately after you see the accepted DHCP conversation.

For MS-PXE, I believe all you need is DHCP, DNS, and TFTP for the initial load.
Reply With Quote