 Re: Route all traffic to gateway problem
I tested the following two cases at SecureClient on Window Vista
1. Chose both Office mode and Hub mode. In this case, I saw a lot of dropping messages with error "encryption fail reason: Packet is from physical IP address but Office Mode is active". According to sk30481, this error may be caused because the IP address of client is overlapping with the external or internal IP address of the Checkpoint. (Actually, the testing machine I used is in the same network with the Checkpoint).
2. Chose only Hub mode (without using Office mode). In this case, I got different error: "encryption fail reason: Received a cleartext packet within an encrypted connection". The suggestion to fix this problem is to use in Office mode.
Thus, I do not know what to do. Actually, I also tried to connect with SecureClient from a different network (at home). But, at home, I could not connect with Hub mode. Could you let me know whether there are some specific configuration steps that are necessary and I may miss.
Actually, the purpose of my setting is quite simply. I just want to setup and collect "encrypted" traffic from VPN users when they access Internet, and analyze that traffic for research purpose. This is the reason why I need to configure VPN to run in Hub mode (to get all incoming and outgoing traffic of VPN users encrypted).  |