Thread: State Sync does not supports VLAN ?
View Single Post
  #3 (permalink)  
Old 2006-04-19
pop_alex pop_alex is offline
Senior Member
  
Join Date: 2005-12-12
Location: Malaysia
Posts: 122
Rep Power: 0
pop_alex has an average reputation (10+)
Default Re: State Sync does not supports VLAN ?
Hi,

Previously I used cross-cable between two firewall for state sync, but now I have three firewall which is two at (let say location A) and one at location B. Firewalls at location A and B are connected to both Cisco Cat6500 series routing switch on each side. These firewalls are connected to dedicated (same) VLAN assigned. So, what should I do to make sure the state sync works across the network ?

Thanks very much.

Regards,

Al
Reply With Quote