[vijayant]

melipla

Time difference between firewalls is 40 seconds, between Smart Center Server and Firewalls is approx 7 min.
Also let me tell you that 90 % of the traffic on this firewall is of some file upload. Either there is very low load or very high (15 Mb) that is the capacity of the internet link connected to this firewall.
Switch ports as I remember is statically configured.

mcnallym,Daniel

Primary:
eth0: 100 Mbit, full duplex, link ok
eth1: no link
eth2: 100 Mbit, full duplex, link ok
eth3: 100 Mbit, full duplex, link ok

Secondary:
eth0: 100 Mbit, full duplex, link ok
eth1: no link
eth2: 100 Mbit, full duplex, link ok
eth3: 100 Mbit, full duplex, link ok

I dont find any abnormalities in the Topology config. Only thing is that network behind the internal interface is not manualy defined.
Also please let me know how to check if the interface is auto or statically defined speed.

Tomorrow we are going to perform this activity. Any suggestion is appreciated..

Thanks