[sebastan_bach]

hi am i am having NGXR65 and i have configured manual static nat .

i have a policy permitting telnet traffic from any to the static nat address.

in my global properties i have enabled manual nat rules
translate destination on client side.

my internal host is 10.1.1.254 and my static nat address is 60.1.1.1.
my external host is 1.1.1.2.firewall internal interface is in the same subnet of the internal host and the external host is in the same subnet of the external interface of the firewall.

on firewall i have a default route pointing to the external host.

here;s are my nat rules.

rule 1

in the original packet
source inside-host(10.1.1.254) destination any service any

in the translated packet
source static-host(60.1.1.1) destination any service any

rule2

in the translated packet
destination statichost(60.1.1.1) source any service any

in the original packet
destination insidehost(10.1.1.254) source any service any

i guess i am missing out on the proxy arp entires in the firewall.

can someone pls point me out in the right direction for this. and also tell me how to add proxy arp entries in the firewall.

waiting for some reply. i am stuck with this for quite some time.

i got the same thing achieved with auto-nat but not able to get it working with manual nat.

regards

sebastan