[vijayant]

Hi Meriol

I checked for CPU and memory utilization those are very much normal since last reboot.

Danielpb

As it has become a normal practice.. we just give reboot command as we see this error. Failover is OK. once the Primary comes up, traffic start going through it as if nothing has happened :)...

Enforcement Module Interfaces are 1000 Base T, and it shows --->
eth0: negotiated 100baseTx-FD flow-control, link ok
eth1: negotiated 100baseTx-FD, link ok
SIOCGMIIPHY on 'eth2' failed: Operation not supported
eth3: negotiated 100baseTx-FD, link ok

eth2 is Sync Int.