 Re: Splat Pro Ospf
We have the licenses and yhe SecureXL enabled.
The configuration is with load sharing in multicast mode.
Please note that the problem wasn't on the dynamic routes :
after some test we see that they works ; only one member has the entire dynamic routes table , but the second module learn them by the first and all works fine ( in the lab without all the Dynamic routes but with some routes to test the OSPF) .
The problems , in production, and with a lot of routes learned via OSPF, were generated when we tried to reboot( or stop the fw/cpha daemon ) one of the modules:
nothing works for approximately 20 seconds when one of the members goes down and when it becomes active there were problems for other 20 seconds.... |