 Re: SmartCenter and NAT
Couple of things to try -
1. Get a packet trace on tcp/18190 and see what source IP the incoming connections are. I regularly use Office Mode and IPAssignment to manage my SmartCenter remotely, and I had to make sure the OM NATted address was in the GUI Clients list.
2. For a test only, add "Any" to the GUI clients list, and test. That will tell you if it's the ACL on the SmartCenter that is causing the problem.
3, If the Any fails, test an SSH connection from the same location, just to make sure that routing and NAT are all working properly, and it's not a general connectivity issue.
FWIW - the SSH/Port Forwarding technique is a great way to get around a lot of these issues, and I tend to use that a lot. That could be a pretty effective workaround. |