Thread: SecureClient routing stops after changing from IPSO to SPLAT
View Single Post
  #2 (permalink)  
Old 2008-01-02
melipla melipla is offline
Senior Member
  
Join Date: 2006-01-25
Posts: 895
Rep Power: 3
melipla has an average reputation (10+)
Default Re: SecureClient routing stops after changing from IPSO to SPLAT
From your drawing it appears that LAN4 and LAN6 are routed through LAN2?

Since 4 & 6 aren't working for SecureClient sourced IPs but are working for LAN1/3/5/2 sources then that indicates a problem with routing for these two networks w/secureclient addresses. Since GW 2's OM IPs can access LAN2, then the disconnect in routing must be the return path for LAN4/6 to GW 2's OM IPs.
__________________
Its all in the documentation.
Reply With Quote