Thread: Can't access new domain through Securemote
View Single Post
  #2 (permalink)  
Old 2007-09-14
MarioL MarioL is offline
Senior Member
  
Join Date: 2007-01-18
Location: London
Posts: 375
Rep Power: 2
MarioL has an average reputation (10+)
Default Re: Can't access new domain through Securemote
I'd advise you to test further.

Try doing just name resolution on the Client PC, check if DNS works. I'm guessing it actually works, but routing is the problem.

If DNS works, then check how routing for the IPs used would work with SecuRemote, it might be that if you really are on the lan the routing is fine, but, if you come via the VPN it has problems. Office mode should give you the same results as from the LAN.

You could also alternatively use NAT hide on inbound SecuRemote connections, but that isn't "as clean".
Last edited by MarioL; 2007-09-14 at 08:17.
Reply With Quote