 Cluster XL Multicast configuration Catalyst 6500 IOS
Hi,
We are having some internal discussions about how to setup the cluster xl on NG FP3 and Catalyst 6500 with IOS. Does anyone run with this configuration? As long as I know from previous experience with Stonebeat, the syntax should be to put incoming port and then outgoing ports. For example, two nodes conected on Catalyst IOS switch on ports 4/1 and 4/2 and router on 4/3 should be:
mac-address-table static 01:00:5e:xx:xx:xx FE4/3 FE4/1 FE 4/2
If runing each node on a catalyst with a trunk port 1/1, nodes on 4/1 and routers on 4/5 should be:
Switch1: mac-address-table static 01:00:5e:xx:xx:xx FE4/5 FE4/1 G1/1
Switch2: mac-address-table static 01:00:5e:xx:xx:xx FE4/5 FE4/1 G1/1
I have not found any good documentation on this issue on all the resources I searched through (Checkpoint Knowledge Base, StoneBeat, CPUG, ...). If you have some, I would appreciate it.
Kind Regards,
Ramon Izaguirre |