Quote:
Just a thought, but I'd start by ruling out the PIX completely if possible. I don't know the configuration on your PIX, but its likely to be NATing the connection between the enforcement module and the management/log server and I was wondering if that might be causing the problem?
I'd try using the 'nat 0' command on the PIX for the required traffic or temporarily replace it with a router to confirm or eliminate it as the cause of the problem. |
The traffic is definately passing through the PIX, I can see it with a 'debug packet'. The nat 0 has been in place and working for a while.
and unfortunately it's too 'live' to replace the PIX with a router.
Quote:
| Does fw.log on SmartCenter increase? |
Yes, but only by a tiny amount due to the entries generated by the SmartCentre itself.
Quote:
| Try to "Install database" on SmartCenter object from SmartDashboard client. |
Just tried that - no better, I'm afraid.
Thank you for you help so far.
Mike.